Snowflakes for Sublimation Snowflakes for Sublimation Snowflakes for Sublimation Snowflakes for Sublimation £1.95 Pack Size: [Choose]SinglePk 10 (+£15.55) Quantity: at £1.95 each Add To Basket Hanging Snowflake Decoration Aluminium Alloy Approx. 8cm by 7.5cm Double Sided Separate Metal Discs for sublimation or adhesive vinyl Printing Area approx. 41mm Bonus silver thread MAY be included *remember to remove the clear film before printing!! You may already know how to sublimate onto metal but if you don't this is one way. Times & Temps may vary according to your heatpress. Print your designs with a 2mm bleed so you get no white edges on the finished key. Lay your sublimation paper with the design facing up and place your discs over the designs and secure with heat resistant tape. Set your heat press for 190 degrees Place your sublimation paper & discs onto the heatpress and cover with blow out paper. The discs should be on top of the paper still. This is fine as metal is a good conductor of heat. Press for 60 seconds. BEWARE!! The metal will be VERY HOT! Remove discs from the paper and using the double sided adhesive tabs provided, stick to your key.